Description
This high quality Vacuum Pod set is a complete system. Included are four all aluminum vacuum pods and a vacuum generator (requires compressed air), a pressure gauge for vacuum hold monitoring, all the necessary connectors, plugs and tubing.
Technical data per pod:
* Material: Cast Aluminum Tooling Plate for Ultimate Flatness
* Dimensions: 3.94 in by 3.94 in.
* Height: 0.875 in.
* Two Press Fittings per Pod
* Tubing: 1/4” diameter
Specifications VTVE-2 Vacuum Generator:
* Deliveres 26” Hg vacuum
* Delivers 0.95 CFM
* 1.60 CFM air consumption
* Operating pressure 30-75 PSI
* Connection via a 1/4” tubing
* The compressed air should be clean and dry
* Addition of a filter before the vacuum line by the user is required as to not suck up particles (supplied elsewhere), failure to do so can result in a damaged Venturi and void of warranty.
Note regarding holding and cutting MDF. These pods are NOT recommended for vacuum holding MDF. MDF is very porous and due to this it is very difficult to hold with vacuum unless the side being held is sealed with something like polyurethane.
Includes:
* 4 pcs Aluminum Vacuum pods “VP1010 Set”
* 1 compressed vacuum generator VTVE-2 with valve and 1/4” air-line fitting
* 12 ft. Of 1/4” Tubing
* 1 vacuum gauge (also acts as vacuum terminator – end of vacuum line)
* fittings
* 1/4” dia. Installed Gasket Cord with Replacement Cord
